Logo Logo
Hilfe
Hilfe
Switch Language to English

Song, Wenjia; Yang, Shanjie; Fukumoto, Masahiro; Lavallee, Yan; Lokachari, Siddharth; Guo, Hongbo; You, Yancheng und Dingwell, Donald B. (2019): Impact interaction of in-flight high-energy molten volcanic ash droplets with jet engines. In: Acta Materialia, Bd. 171: S. 119-131

Volltext auf 'Open Access LMU' nicht verfügbar.

Abstract

The turbine technology incorporated in jet engines is inherently vulnerable to attack by environmental silicate debris. Amongst the various kinds of such debris, volcanic ash is a particular threat as its glass softens to a liquid at temperatures of 500-800 degrees C, far below jet engine operating temperatures of similar to 1500 degrees C. As a result, ingested re-molten droplets impact and form splats on the protective thermal barrier coatings (TBCs). Investigation of the damage to jet engines ensuing from this process has, to date been restricted to forensic observations after critical encounters. Here, we employ a thermal spray technology to recreate the 'in-situ' generation of molten volcanic ash droplets and observe their morphological evolution and interaction with TBC5. The mechanism of splat formation is found to depend both on substrate topography and on in-flight droplet characteristics, whereby splat circularity increases with surface roughness and with the product of the Weber and Reynolds numbers. The experiments reveal that the molten ash droplet adhesion rate is dictated by droplet temperature and viscosity, ash concentration and substrate roughness. A new dimensionless number, S, is developed to quantify the molten ash droplet adhesion rate to both substrate topography and in-flight droplet characteristics. These findings provide a greatly improved basis for the quantification of the hazard potential of volcanic ash to jet engines and should be incorporated into protocols for operational aviation response during volcanic crises. (C) 2019 Published by Elsevier Ltd on behalf of Acta Materialia Inc.

Dokument bearbeiten Dokument bearbeiten