|
Eine Ebene nach oben |
Gruppiert nach:
Dokumententyp
| Veröffentlichungsdatum
Springe zu: Zeitschriftenartikel
Anzahl der Publikationen: 27
Zeitschriftenartikel
Kessler, Andreas; Dosch, Maximilian; Reymus, Marcel und Folwaczny, Matthias
(2022):
Influence of 3D-printing method, resin material, and sterilization on the accuracy of virtually designed surgical implant guides.
In: Journal of Prosthetic Dentistry, Bd. 128, Nr. 2: S. 196-204
Greil, Veronika; Mayinger, Felicitas; Reymus, Marcel und Stawarczyk, Bogna
(2022):
Water sorption, water solubility, degree of conversion, elastic indentation modulus, edge chipping resistance and flexural strength of 3D-printed denture base resins.
In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 137, 105565
Suedbeck, Sonja; Hoffmann, Moritz; Reymus, Marcel; Buser, Ramona; Edelhoff, Daniel und Stawarczyk, Bogna
(2022):
Bending moment of implants restored with CAD/ CAM polymer-based restoration materials with or without a titanium base before and after artificial aging.
In: Dental Materials, Bd. 38, Nr. 9, e245-e255
Schmeiser, Felix; Arbogast, Fee; Ruppel, Hendrik; Mayinger, Felicitas; Reymus, Marcel und Stawarczyk, Bogna
(2022):
Methodology investigation: Impact of crown geometry, crown, abutment and antagonist material and thermal loading on the two-body wear of dental materials.
In: Dental Materials, Bd. 38, Nr. 2: S. 266-280
Lankes, Valerie; Reymus, Marcel; Liebermann, Anja und Stawarczyk, Bogna
(2022):
Bond strength between temporary 3D printable resin and conventional resin composite: influence of cleaning methods and air-abrasion parameters.
In: Clinical Oral Investigations, Bd. 27, Nr. 1: S. 31-43
[PDF, 955kB]
Reymus, Marcel und Stawarczyk, Bogna
(2021):
In vitro study on the influence of postpolymerization and aging on the Martens parameters of 3D-printed occlusal devices.
In: Journal of Prosthetic Dentistry, Bd. 125, Nr. 5: S. 817-823
Mayinger, Felicitas; Reymus, Marcel; Liebermann, Anja; Richter, Marc; Kubryk, Patrick; Großekappenberg, Henning und Stawarczyk, Bogna
(2021):
Impact of polymerization and storage on the degree of conversion and mechanical properties of veneering resin composites.
In: Dental Materials Journal, Bd. 40, Nr. 2: S. 487-497
Mayer, Johannes; Stawarczyk, Bogna; Vogt, Konstantin; Hickel, Reinhard; Edelhoff, Daniel und Reymus, Marcel
(2021):
Influence of cleaning methods after 3D printing on two-body wear and fracture load of resin-based temporary crown and bridge material.
In: Clinical Oral Investigations, Bd. 25, Nr. 10: S. 5987-5996
Mayer, Johannes; Reymus, Marcel; Wiedenmann, Felicitas; Edelhoff, Daniel; Hickel, Reinhard und Stawarczyk, Bogna
(2021):
Temporary 3D-Printed Fixed Dental Prosthesis Materials: Impact of Postprinting Cleaning Methods on Degree of Conversion and Surface and Mechanical Properties.
In: International Journal of Prosthodontics, Bd. 34, Nr. 6: S. 784-795
Li, Ping; Lambart, Anna-Lena; Stawarczyk, Bogna; Reymus, Marcel und Spintzyk, Sebastian
(2021):
Postpolymerization of a 3D-printed denture base polymer: Impact of post-curing methods on surface characteristics, flexural strength, and cytotoxicity.
In: Journal of Dentistry, Bd. 115, 103856
Anton, Xenia; Stawarczyk, Bogna; Reymus, Marcel; Joda, Tim und Liebermann, Anja
(2021):
Impact of High-Speed Sintering on Accuracy and Fit of 4 mol% Yttria-Stabilized Tetragonal Zirconia Polycrystals.
In: International Journal of Prosthodontics, Bd. 34, Nr. 6: S. 775-783
Müller, Daniel David; Bissinger, Ricarda; Reymus, Marcel; Buecher, Katharina; Hickel, Reinhard und Kühnisch, Jan
(2020):
Survival and complication analyses of avulsed and replanted permanent teeth.
In: Scientific Reports, Bd. 10, Nr. 1, 2841
[PDF, 1MB]
Reymus, Marcel und Stawarczyk, Bogna
(2020):
Influence of Different Postpolymerization Strategies and Artificial Aging on Hardness of 3D-Printed Resin Materials: An In Vitro Study.
In: International Journal of Prosthodontics, Bd. 33, Nr. 6: S. 634-640
Reymus, Marcel; Liebermann, A. und Diegritz, C.
(2020):
Virtual reality: an effective tool for teaching root canal anatomy to undergraduate dental students - a preliminary study.
In: International Endodontic Journal, Bd. 53, Nr. 11: S. 1581-1587
[PDF, 459kB]
Prechtel, Alexander 
ORCID: https://orcid.org/0000-0002-4666-051X; Stawarczyk, Bogna ORCID: https://orcid.org/0000-0003-1732-3255; Hickel, Reinhard; Edelhoff, Daniel und Reymus, Marcel
(2020):
Fracture load of 3D printed PEEK inlays compared with milled ones, direct resin composite fillings, and sound teeth.
In: Clinical Oral Investigations
[PDF, 828kB]
ORCID: https://orcid.org/0000-0002-4666-051X; Stawarczyk, Bogna ORCID: https://orcid.org/0000-0003-1732-3255; Hickel, Reinhard; Edelhoff, Daniel und Reymus, Marcel
(2020):
Fracture load of 3D printed PEEK inlays compared with milled ones, direct resin composite fillings, and sound teeth.
In: Clinical Oral Investigations
[PDF, 828kB]
Prechtel, Alexander; Reymus, Marcel; Edelhoff, Daniel; Hickel, Reinhard und Stawarczyk, Bogna
(2020):
Comparison of various 3D printed and milled PAEK materials: Effect of printing direction and artificial aging on Martens parameters.
In: Dental Materials, Bd. 36, Nr. 2: S. 197-209
Reymus, Marcel; Fabritius, Rosalie; Kessler, Andreas; Hickel, Reinhard; Edelhoff, Daniel und Stawarczyk, Bogna
(2020):
Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study.
In: Clinical Oral Investigations, Bd. 24, Nr. 2: S. 701-710
Reymus, Marcel; Liebermann, Anja; Diegritz, Christian und Kessler, Andreas
(2020):
Development and evaluation of an interdisciplinary teaching model via 3D printing.
In: Clinical and Experimental Dental Research, Bd. 7, Nr. 1: S. 3-10
[PDF, 1MB]
Krug, Ralf; Reich, Sebastian; Connert, Thomas; Kess, Stefan; Soliman, Sebastian; Reymus, Marcel und Krastl, Gabriel
(2020):
Guided endodontics: a comparative in vitro study on the accuracy and effort of two different planning workflows.
In: International Journal of Computerized Dentistry, Bd. 23, Nr. 2: S. 119-128
Fotiadou, Christina; Frasheri, Iris; Reymus, Marcel; Diegritz, Christian; Kessler, Andreas; Manhart, Jürgen; Hickel, Reinhard; Klinke, Thomas und Heck, Katrin
(2020):
Correction: A 3-year controlled randomized clinical study on the performance of two glass-ionomer cements in Class II cavities of permanent teeth.
In: Quintessence International, Bd. 51, Nr. 1, E1-E11
Bissinger, Ricarda; Müller, Daniel David; Reymus, Marcel; Khazaei, Yegane; Hickel, Reinhard; Bücher, Katharina und Kühnisch, Jan
(2020):
Treatment outcomes after uncomplicated and complicated crown fractures in permanent teeth.
In: Clinical oral investigations, Bd. 25: S. 133-143
[PDF, 440kB]
Reymus, Marcel; Hickel, Reinhard und Keßler, Andreas
(2020):
Accuracy of CAD/CAM-fabricated bite splints: milling vs 3D printing.
In: Clinical oral investigations, Bd. 24: S. 4607-4615
[PDF, 2MB]
Liebermann, Anja; Spintzyk, Sebastian; Reymus, Marcel; Schweizer, Ernst und Stawarczyk, Bogna
(2019):
Nine prophylactic polishing pastes: impact on discoloration, gloss, and surface properties of a CAD/CAM resin composite.
In: Clinical Oral Investigations, Bd. 23, Nr. 1: S. 327-335
Reymus, Marcel; Roos, Malgorzata; Eichberger, Marlis; Edelhoff, Daniel; Hickel, Reinhard und Stawarczyk, Bogna
(2019):
Bonding to new CAD/CAM resin composites: influence of air abrasion and conditioning agents as pretreatment strategy.
In: Clinical Oral Investigations, Bd. 23, Nr. 2: S. 529-538
Fotiadou, Christina; Frasheri, Iris; Reymus, Marcel; Diegritz, Christian; Kessler, Andreas; Manhart, Jürgen; Hickel, Reinhard; Klinke, Thomas und Heck, Katrin
(2019):
A 3-year controlled randomized clinical study on the performance of two glass-ionomer cements in Class II cavities of permanent teeth.
In: Quintessence International, Bd. 50, Nr. 8: S. 592-602
Reymus, Marcel; Luemkemann, Nina und Stawarczyk, Bogna
(2019):
3D-printed material for temporary restorations: impact of print layer thickness and post-curing method on degree of conversion.
In: International Journal of Computerized Dentistry, Bd. 22, Nr. 3: S. 231-237
Kessler, Andreas; Reymus, Marcel; Hickel, Reinhard und Kunzelmann, Karl-Hein
(2019):
Three-body wear of 3D printed temporary materials.
In: Dental Materials, Bd. 35, Nr. 12: S. 1805-1812