![[höher]](/style/images/multi_up.png)
Eine Ebene höherGruppiert nach: Dokumententyp |
Veröffentlichungsdatum
Anzahl der Publikationen: 18
2024
Kessler, Andreas; Reichert, Thilo 
ORCID: https://orcid.org/0009-0001-0097-0707; Lindner, Stefanie; Liebermann, Anja; El Gezawi, Moataz und Kaisarly, Dalia ORCID: https://orcid.org/0000-0003-1520-2062
(2024):
Influence of additive and subtractive zirconia and lithium disilicate manufacturing on tensile bond strength and surface topography.
In: Journal of Prosthetic Dentistry
ORCID: https://orcid.org/0009-0001-0097-0707; Lindner, Stefanie; Liebermann, Anja; El Gezawi, Moataz und Kaisarly, Dalia ORCID: https://orcid.org/0000-0003-1520-2062
(2024):
Influence of additive and subtractive zirconia and lithium disilicate manufacturing on tensile bond strength and surface topography.
In: Journal of Prosthetic Dentistry
2023
Lindner, Stefanie; Frasheri, Iris; Hickel, Reinhard; Crispin, Alexander und Kessler, Andreas
(2023):
Retrospective clinical study on the performance and aesthetic outcome of pressed lithium disilicate restorations in posterior teeth up to 8.3 years.
In: Clinical Oral Investigations, Bd. 27, Nr. 12: S. 7383-7393
[PDF, 911kB]
2022
Hoffmann, Lea; Sabbagh, Hisham; Wichelhaus, Andera und Kessler, Andreas
(2022):
Bracket transfer accuracy with two different three-dimensional printed transfer trays vs silicone transfer trays.
In: Angle Orthodontist, Bd. 92, Nr. 3: S. 364-371
Kessler, Andreas; Dosch, Maximilian; Reymus, Marcel und Folwaczny, Matthias
(2022):
Influence of 3D-printing method, resin material, and sterilization on the accuracy of virtually designed surgical implant guides.
In: Journal of Prosthetic Dentistry, Bd. 128, Nr. 2: S. 196-204
Frasheri, Iris; Aumer, Katharina; Kessler, Andreas; Miosge, Nicolai und Folwaczny, Matthias
(2022):
Effects of resin materials dedicated for additive manufacturing of temporary dental restorations on human gingival keratinocytes.
In: Journal of Esthetic and Restorative Dentistry, Bd. 34, Nr. 7: S. 1105-1112
[PDF, 3MB]
2021
Hoffmann, Lea; Kessler, Andreas und Kunzelmann, Karl-Heinz
(2021):
Three-body wear of luting composites and influence of the ACTA wheel material.
In: Dental Materials Journal, Bd. 40, Nr. 5: S. 1226-1234
Kessler, Andreas; Le, Vinzenz und Folwaczny, Matthias
(2021):
Influence of the tooth position, guided sleeve height, supporting length, manufacturing methods, and resin E-modulus on the in vitro accuracy of surgical implant guides in a free-end situation.
In: Clinical Oral Implants Research, Bd. 32, Nr. 9: S. 1097-1104
Kessler, Andreas; Kapor, Svetlana; Erdelt, Kurt; Hickel, Reinhard; Edelhoff, Daniel; Syrek, Andreas; Güth, Jan-Frederik und Kühnisch, Jan
(2021):
Two-body wear and fracture behaviour of an experimental paediatric composite crown in comparison to zirconia and stainless steel crowns dependent on the cementation mode.
In: Dental Materials, Bd. 37, Nr. 2: S. 264-271
Kessler, Andreas; Hickel, Reinhard und Ilie, Nicoleta
(2021):
In vitro investigation of the influence of printing direction on the flexural strength, flexural modulus and fractographic analysis of 3D-printed temporary materials.
In: Dental Materials Journal, Bd. 40, Nr. 3: S. 641-649
2020
Kessler, Andreas; Reichl, Franz-Xaver; Folwaczny, Matthias und Hogg, Christof
(2020):
Monomer release from surgical guide resins manufactured with different 3D printing devices.
In: Dental Materials, Bd. 36, Nr. 11: S. 1486-1492
Reymus, Marcel; Fabritius, Rosalie; Kessler, Andreas; Hickel, Reinhard; Edelhoff, Daniel und Stawarczyk, Bogna
(2020):
Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study.
In: Clinical Oral Investigations, Bd. 24, Nr. 2: S. 701-710
Reymus, Marcel; Liebermann, Anja; Diegritz, Christian und Kessler, Andreas
(2020):
Development and evaluation of an interdisciplinary teaching model via 3D printing.
In: Clinical and Experimental Dental Research, Bd. 7, Nr. 1: S. 3-10
[PDF, 1MB]
Fotiadou, Christina; Frasheri, Iris; Reymus, Marcel; Diegritz, Christian; Kessler, Andreas; Manhart, Jürgen; Hickel, Reinhard; Klinke, Thomas und Heck, Katrin
(2020):
Correction: A 3-year controlled randomized clinical study on the performance of two glass-ionomer cements in Class II cavities of permanent teeth.
In: Quintessence International, Bd. 51, Nr. 1, E1-E11
Kühnisch, Jan; Bedir, Ahmed; Lo, Yi-Fang; Kessler, Andreas; Lang, Toni; Mansmann, Ulrich; Heinrich-Weltzien, Roswitha und Hickel, Reinhard
(2020):
Meta-analysis of the longevity of commonly used pit and fissure sealant materials.
In: Dental materials : official publication of the Academy of Dental Materials, Bd. 36, Nr. 5, e158-e168
2019
Lo, Yi-Fang; Crispin, Alexander; Kessler, Andreas; Hickel, Reinhard und Kühnisch, Jan
(2019):
What is an Appropriate Etching Time For Sealant Application on Permanent Molars? Results from a Meta-Analysis.
In: The journal of adhesive dentistry, Bd. 21, Nr. 6: S. 487-495
Kessler, Andreas; Kaisarly, Dalia; Hickel, Reinhard und Kunzelmann, Karl-Heinz
(2019):
Effect of fiber incorporation on the contraction stress of composite materials.
In: Clinical Oral Investigations, Bd. 23, Nr. 3: S. 1461-1471
Fotiadou, Christina; Frasheri, Iris; Reymus, Marcel; Diegritz, Christian; Kessler, Andreas; Manhart, Jürgen; Hickel, Reinhard; Klinke, Thomas und Heck, Katrin
(2019):
A 3-year controlled randomized clinical study on the performance of two glass-ionomer cements in Class II cavities of permanent teeth.
In: Quintessence International, Bd. 50, Nr. 8: S. 592-602
Kessler, Andreas; Reymus, Marcel; Hickel, Reinhard und Kunzelmann, Karl-Hein
(2019):
Three-body wear of 3D printed temporary materials.
In: Dental Materials, Bd. 35, Nr. 12: S. 1805-1812