Logo Logo
[höher] Eine Ebene höher
Exportieren als [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Gruppiert nach: Dokumententyp | Veröffentlichungsdatum
Springe zu: Zeitschriftenartikel
Anzahl der Publikationen: 132

Zeitschriftenartikel

Coldea, Andrea ORCID logoORCID: https://orcid.org/0000-0003-3306-3131; Mayinger, Felicitas ORCID logoORCID: https://orcid.org/0000-0003-0089-9995; Meinen, John; Hoffmann, Moritz ORCID logoORCID: https://orcid.org/0009-0007-2743-6719 und Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 (Mai 2025): Mechanical properties of 3D printed denture base polymers. In: Journal of Prosthetic Dentistry, Bd. 133, Nr. 5, 1361.e1-1361.e8 [PDF, 1MB]

Irlinger, Carola ORCID logoORCID: https://orcid.org/0009-0009-7061-612X; Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255; Meinen, John; Edelhoff, Daniel und Mayinger, Felicitas ORCID logoORCID: https://orcid.org/0000-0003-0089-9995 (2025): Impact of polishing, glazing and firing, restoration thickness, point of loading and aging on the edge chipping resistance of lithium silicate ceramics. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 170, 107106 [PDF, 5MB]

Coldea, Andrea ORCID logoORCID: https://orcid.org/0000-0003-3306-3131; Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255; Meinen, John; Lankes, Valerie; Swain, Michael V. und Roos, Malgorzata (2025): Fracture load of feldspar ceramic crowns: effects of surface treatments and aging. In: Clinical Oral Investigations, Bd. 29, 51 [PDF, 1MB]

Gekle, Sophie; Mayinger, Felicitas ORCID logoORCID: https://orcid.org/0000-0003-0089-9995; Kreitmair, Ursula; Reymus, Marcel ORCID logoORCID: https://orcid.org/0000-0001-9040-5623; Hoffmann, Moritz ORCID logoORCID: https://orcid.org/0009-0007-2743-6719 und Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 (2025): Impact of different post-polymerization protocols on the material properties of three printed dental resins. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 172, 107164 [PDF, 6MB]

Mayinger, Felicitas ORCID logoORCID: https://orcid.org/0000-0003-0089-9995; Löschel, Andreas; Reznikova, Elena; Wilhelm, Christian und Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 (Dezember 2024): Influence of silver coated zeolite fillers on the chemical and mechanical properties of 3D-printed polyphenylene sulfone restorations. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 160, 106756 [PDF, 6MB]

Maleki, Tina ORCID logoORCID: https://orcid.org/0009-0004-1355-0746; Meinen, John; Coldea, Andrea ORCID logoORCID: https://orcid.org/0000-0003-3306-3131; Reymus, Marcel ORCID logoORCID: https://orcid.org/0000-0001-9040-5623; Edelhoff, Daniel ORCID logoORCID: https://orcid.org/0000-0002-1733-5726 und Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 (2024): Mechanical and physical properties of splint materials for oral appliances produced by additive, subtractive and conventional manufacturing. In: Dental Materials, Bd. 40, Nr. 8: S. 1171-1183 [PDF, 6MB]

Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255; Meinen, John und Wuersching, Sabina Noreen ORCID logoORCID: https://orcid.org/0000-0001-6565-7255 (2024): Two-body wear of novel monolithic lithium-silicate ceramic materials and their corresponding different antagonists. In: Journal of Dentistry, Bd. 144, 104952 [PDF, 12MB]

Hoffmann, Moritz ORCID logoORCID: https://orcid.org/0009-0007-2743-6719; Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255; Günster, Jens und Zocca, Andrea ORCID logoORCID: https://orcid.org/0000-0002-0213-2766 (2024): Influence of additives and binder on the physical properties of dental silicate glass-ceramic feedstock for additive manufacturing. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 155, 106563 [PDF, 7MB]

Lask, Marie; Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255; Reymus, Marcel ORCID logoORCID: https://orcid.org/0000-0001-9040-5623; Meinen, John und Mayinger, Felicitas ORCID logoORCID: https://orcid.org/0000-0003-0089-9995 (2024): Impact of varnishing, coating, and polishing on the chemical and mechanical properties of a 3D printed resin and two veneering composite resins. In: Journal of Prosthetic Dentistry, Bd. 132, Nr. 2, 466 [PDF, 3MB]

Mayinger, Felicitas ORCID logoORCID: https://orcid.org/0000-0003-0089-9995; Ender, Andreas; Strickstrock, Monika; Elsayed, Adham; Nassary Zadeh, Parissa; Zimmermann, Marcus und Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 (2024): Impact of the sintering parameters on the grain size, crystal phases, translucency, biaxial flexural strength, and fracture load of zirconia materials. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 155, 106580 [PDF, 16MB]

Micovic Soldatovic, Danka; Bitter, Maximiliane; Meinen, John; Huth, Karin Christine; Liebermann, Anja und Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 (2023): Impact of material combinations and removal and insertion cycles on the retention force of telescopic systems. In: Clinical Oral Investigations, Bd. 27, Nr. 7: S. 4007-4016 [PDF, 962kB]

Kelch, Matthias; Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 und Mayinger, Felicitas (2022): Time-dependent degree of conversion, Martens parameters, and flexural strength of different dual-polymerizing resin composite luting materials. In: Clinical oral investigations, Bd. 26: S. 1067-1076 [PDF, 1MB]

Kelch, Matthias ORCID logoORCID: https://orcid.org/0000-0002-6412-127X; Stawarczyk, Bogna und Mayinger, Felicitas (2022): Chemical and mechanical properties of dual-polymerizing core build-up materials. In: Clinical Oral Investigations, Bd. 26, Nr. 7: S. 4885-4896 [PDF, 1MB]

Mayinger, Felicitas ORCID logoORCID: https://orcid.org/0000-0003-0089-9995; Buser, Ramona; Laier, Maximilian; Schonhoff, Lisa Marie; Kelch, Matthias; Hampe, Rüdiger und Stawarczyk, Bogna (2022): Impact of the material and sintering protocol, layer thickness, and thermomechanical aging on the two-body wear and fracture load of 4Y-TZP crowns. In: Clinical Oral Investigations, Bd. 26, Nr. 11: S. 6617-6628 [PDF, 1MB]

Lankes, Valerie; Reymus, Marcel; Liebermann, Anja und Stawarczyk, Bogna (2022): Bond strength between temporary 3D printable resin and conventional resin composite: influence of cleaning methods and air-abrasion parameters. In: Clinical Oral Investigations, Bd. 27, Nr. 1: S. 31-43 [PDF, 955kB]

Wuersching, Sabina Noreen; Westphal, David; Stawarczyk, Bogna; Edelhoff, Daniel und Kollmuss, Maximilian (2022): Surface properties and initial bacterial biofilm growth on 3D-printed oral appliances: a comparative in vitro study. In: Clinical Oral Investigations, Bd. 27, Nr. 6: S. 2667-2677 [PDF, 995kB]

Edelhoff, Daniel; Erdelt, Kurt-Jürgen; Stawarczyk, Bogna und Liebermann, Anja (2022): Pressable lithium disilicate ceramic versus CAD/CAM resin composite restorations in patients with moderate to severe tooth wear: Clinical observations up to 13 years. In: Journal of Esthetic and Restorative Dentistry [PDF, 2MB]

Schmeiser, Felix; Baumert, Uwe und Stawarczyk, Bogna (2022): Two-body wear of occlusal splint materials from subtractive computer-aided manufacturing and three-dimensional printing. In: Clinical Oral Investigations, Bd. 26, Nr. 9: S. 5857-5866

Fouda, Ahmed Mahmoud; Atta, Osama; Ozcan, Mutlu; Stawarczyk, Bogna; Glaum, Robert und Bourauel, Christoph (2022): An investigation on fatigue, fracture resistance, and color properties of aesthetic CAD/CAM monolithic ceramics. In: Clinical Oral Investigations, Bd. 27, Nr. 6: S. 2653-2665

Schmeiser, Felix; Arbogast, Fee; Ruppel, Hendrik; Mayinger, Felicitas; Reymus, Marcel und Stawarczyk, Bogna (2022): Methodology investigation: Impact of crown geometry, crown, abutment and antagonist material and thermal loading on the two-body wear of dental materials. In: Dental Materials, Bd. 38, Nr. 2: S. 266-280

Begand, Sabine; Spintzyk, Sebastian; Geis-Gerstorfer, Juergen; Bourauel, Christoph; Keilig, Ludger; Lohbauer, Ulrich; Worpenberg, Christin; Greuling, Andreas; Adjiski, Ranko; Jandt, Klaus D.; Luemkemann, Nina; Stawarczyk, Bogna; Guellmar, Andre; Kailer, Andreas; Oberle, Natalie und Stephan, Marc (2022): Fracture toughness of 3Y-TZP ceramic measured by the Chevron-Notch Beam method: A roundrobin study. In: Dental Materials, Bd. 38, Nr. 7: S. 1128-1139

Suedbeck, Sonja; Hoffmann, Moritz; Reymus, Marcel; Buser, Ramona; Edelhoff, Daniel und Stawarczyk, Bogna (2022): Bending moment of implants restored with CAD/ CAM polymer-based restoration materials with or without a titanium base before and after artificial aging. In: Dental Materials, Bd. 38, Nr. 9, e245-e255

Hensel, Justine; Reise, Michael; Liebermann, Anja; Buser, Ramona und Stawarczyk, Bogna (2022): Impact of multiple firings on thermal properties and bond strength of veneered zirconia restorations. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 128, 105134

Soldatovic, Danka Micovic; Liebermann, Anja; Huth, Karin C. und Stawarczyk, Bogna (2022): Fracture load of different veneered and implant-supported 4-UNIT cantilever PEEK fixed dental prostheses. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 129, 105173

Hensel, Justine; Reise, Michael; Liebermann, Anja; Buser, Ramona und Stawarczyk, Bogna (2022): Impact of multiple firings on fracture load of veneered zirconia restorations. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 130, 105213

Greil, Veronika; Mayinger, Felicitas; Reymus, Marcel und Stawarczyk, Bogna (2022): Water sorption, water solubility, degree of conversion, elastic indentation modulus, edge chipping resistance and flexural strength of 3D-printed denture base resins. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 137, 105565

Mayinger, Felicitas; Lumkemann, Nina; Musik, Martyna; Eichberger, Marlis und Stawarczyk, Bogna (2022): Comparison of mechanical properties of different reinforced glass-ceramics. In: Journal of Prosthetic Dentistry, Bd. 127, Nr. 1: S. 146-153

Schoenhoff, Lisa Marie; Mayinger, Felicitas; Eichberger, Marlis; Loesch, Andrea; Reznikova, Elena und Stawarczyk, Bogna (2022): Three-dimensionally printed and milled polyphenylene sulfone materials in dentistry: Tensile bond strength to veneering composite resin and surface properties after different pretreatments. In: Journal of Prosthetic Dentistry, Bd. 128, Nr. 1: S. 93-99

Jungbauer, Rebecca; Proff, Peter; Edelhoff, Daniel und Stawarczyk, Bogna (2022): Impact of different pretreatments and attachment materials on shear bond strength between monolithic zirconia restorations and metal brackets. In: Scientific Reports, Bd. 12, Nr. 1, 8514

Mayinger, Felicitas; Micovic, Danka; Schleich, Andreas; Roos, Malgorzata; Eichberger, Marlis und Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 (2021): Retention force of polyetheretherketone and cobalt-chrome-molybdenum removable dental prosthesis clasps after artificial aging. In: Clinical oral investigations, Bd. 25, Nr. 5: S. 3141-3149 [PDF, 925kB]

Anton, Xenia; Stawarczyk, Bogna; Reymus, Marcel; Joda, Tim und Liebermann, Anja (2021): Impact of High-Speed Sintering on Accuracy and Fit of 4 mol% Yttria-Stabilized Tetragonal Zirconia Polycrystals. In: International Journal of Prosthodontics, Bd. 34, Nr. 6: S. 775-783

Hampe, Rüdiger; Theelke, Björn; Lümkemann, Nina und Stawarczyk, Bogna (2021): Impact of artificial aging by thermocycling on edge chipping resistance and Martens hardness of different dental CAD-CAM restorative materials. In: Journal of Prosthetic Dentistry, Bd. 125, Nr. 2: S. 326-333

Jerman, Eva; Lümkemann, Nina; Eichberger, Marlis; Hampe, Rüdiger und Stawarczyk, Bogna (2021): Impact of varying step-stress protocols on the fatigue behavior of 3Y-TZP, 4Y-TZP and 5Y-TZP ceramic. In: Dental Materials, Bd. 37, Nr. 7: S. 1073-1082

Jerman, Eva; Lümkemann, Nina; Eichberger, Marlis; Zoller, Christian; Nothelfer, Steffen; Kienle, Alwin und Stawarczyk, Bogna (2021): Evaluation of translucency, Marten's hardness, biaxial flexural strength and fracture toughness of 3Y-TZP, 4Y-TZP and 5Y-TZP materials. In: Dental Materials, Bd. 37, Nr. 2: S. 212-222

Jorio, Isabelle C.; Stawarczyk, Bogna; Attin, Thomas; Schmidlin, Patrick R. und Sahrmann, Philipp (2021): Reduced fracture load of dental implants after implantoplasty with different instrumentation sequences. An in vitro study. In: Clinical Oral Implants Research, Bd. 32, Nr. 8: S. 881-892

Jungbauer, Rebecca; Kirschneck, Christian; Hammer, Christian M.; Proff, Peter; Edelhoff, Daniel und Stawarczyk, Bogna (2021): Orthodontic bonding to silicate ceramics: impact of different pretreatment methods on shear bond strength between ceramic restorations and ceramic brackets. In: Clinical Oral Investigations, Bd. 26, Nr. 3: S. 2827-2837

Kelch, Matthias; Stawarczyk, Bogna und Mayinger, Felicitas (2021): Time-dependent degree of conversion, Martens parameters, and flexural strength of different dual-polymerizing resin composite luting materials. In: Clinical Oral Investigations, Bd. 26, Nr. 1: S. 1067-1076

Kreutz, Marietta; Wiegand, Annette; Stawarczyk, Bogna; Lumkemann, Nina und Rizk, Marta (2021): Characterization of Methacrylate-Based Resins Containing Methacryl-Polyhedral Oligomeric Silsesquioxanes (MA-POSS-8). In: Materials, Bd. 14, Nr. 7, 1680

Li, Ping; Lambart, Anna-Lena; Stawarczyk, Bogna; Reymus, Marcel und Spintzyk, Sebastian (2021): Postpolymerization of a 3D-printed denture base polymer: Impact of post-curing methods on surface characteristics, flexural strength, and cytotoxicity. In: Journal of Dentistry, Bd. 115, 103856

Liebermann, Anja; Langwieder, Benedikt; Brauneis, Micheal; Eichberger, Marlis und Stawarczyk, Bogna (2021): Impact of thermocycling on mechanical properties and discoloration of veneering composite resins after storage in various staining media. In: Journal of Prosthetic Dentistry, Bd. 125, Nr. 6: S. 940-945

Liebermann, Anja; Mandl, Alicia; Eichberger, Marlis und Stawarczyk, Bogna (2021): Impact of resin composite cement on color of computer-aided design/computer-aided manufacturing ceramics. In: Journal of Esthetic and Restorative Dentistry, Bd. 33, Nr. 5: S. 786-794

Lumkemann, Nina und Stawarczyk, Bogna (2021): Impact of hydrothermal aging on the light transmittance and flexural strength of colored yttria-stabilized zirconia materials of different formulations. In: Journal of Prosthetic Dentistry, Bd. 125, Nr. 3: S. 518-526

Mayer, Johannes; Reymus, Marcel; Wiedenmann, Felicitas; Edelhoff, Daniel; Hickel, Reinhard und Stawarczyk, Bogna (2021): Temporary 3D-Printed Fixed Dental Prosthesis Materials: Impact of Postprinting Cleaning Methods on Degree of Conversion and Surface and Mechanical Properties. In: International Journal of Prosthodontics, Bd. 34, Nr. 6: S. 784-795

Mayer, Johannes; Stawarczyk, Bogna; Vogt, Konstantin; Hickel, Reinhard; Edelhoff, Daniel und Reymus, Marcel (2021): Influence of cleaning methods after 3D printing on two-body wear and fracture load of resin-based temporary crown and bridge material. In: Clinical Oral Investigations, Bd. 25, Nr. 10: S. 5987-5996

Mayinger, Felicitas; Fiebig, Maximilian; Roos, Malgorzata; Eichberger, Marlis; Lümkemann, Nina und Stawarczyk, Bogna (2021): Bonding Behavior Between Polyetheretherketone and Polymethylmethacrylate Acrylic Denture Polymer. In: Journal of Adhesive Dentistry, Bd. 23, Nr. 2: S. 145-158

Mayinger, Felicitas; Pfefferle, Regina; Reichert, Axel und Stawarczyk, Bogna (2021): Impact of High-Speed Sintering of Three-Unit 3Y-TZP and 4Y-TZP Fixed Dental Prostheses on Fracture Load With and Without Artificial Aging. In: International Journal of Prosthodontics, Bd. 34, Nr. 1: S. 47-53

Mayinger, Felicitas; Reymus, Marcel; Liebermann, Anja; Richter, Marc; Kubryk, Patrick; Großekappenberg, Henning und Stawarczyk, Bogna (2021): Impact of polymerization and storage on the degree of conversion and mechanical properties of veneering resin composites. In: Dental Materials Journal, Bd. 40, Nr. 2: S. 487-497

Reymus, Marcel und Stawarczyk, Bogna (2021): In vitro study on the influence of postpolymerization and aging on the Martens parameters of 3D-printed occlusal devices. In: Journal of Prosthetic Dentistry, Bd. 125, Nr. 5: S. 817-823

Schoenhoff, Lisa Marie; Mayinger, Felicitas; Eichberger, Marlis; Reznikova, Elena und Stawarczyk, Bogna (2021): 3D printing of dental restorations: Mechanical properties of thermoplastic polymer materials. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 119, 104544

Schönhoff, Lisa Marie; Lümkemann, Nina; Buser, Ramona; Hampe, Rüdiger und Stawarczyk, Bogna (2021): Fatigue resistance of monolithic strength-gradient zirconia materials. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 119, 104504

Spintzyk, Sebastian; Geis-Gerstorfer, Jürgen; Bourauel, Christoph; Keilig, Ludger; Lohbauer, Ulrich; Brune, Annike; Greuling, Andreas; Arnold, Christin; Rues, Stefan; Adjiski, Ranko; Sawada, Tomofumi; Luemkemann, Nina; Stawarczyk, Bogna; Ilie, Nicoleta; Frankenberger, Roland; Dudek, Marie-Christine; Strickstrock, Monika und Begand, Sabine (2021): Biaxial flexural strength of zirconia: A round robin test with 12 laboratories. In: Dental Materials, Bd. 37, Nr. 2: S. 284-295

Stawarczyk, Bogna; Brauneis, Michael; Langwieder, Benedikt; Spintzyk, Sebastian; Eichberger, Marlis und Liebermann, Anja (2021): Mechanical and optical properties of indirect veneering resin composites after different aging regimes. In: Dental Materials Journal, Bd. 40, Nr. 2: S. 279-287

Stawarczyk, Bogna; Mandl, Alicia und Liebermann, Anja (2021): Modern CAD/CAM silicate ceramics, their translucency level and impact of hydrothermal aging on translucency, Martens hardness, biaxial flexural strength and their reliability. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 118, 104456

Steiner, Rene; Schwarz, Vincent; Schnabl, Dagmar; Edelhoff, Daniel und Stawarczyk, Bogna (2021): Effect of adhesive systems, direct resin composites and artificial aging on tensile bond strength between different resin composites and human dentin. In: International Journal of Adhesion and Adhesives, Bd. 108, 102888

Wiedenmann, Felicitas; Klören, Markus; Edelhoff, Daniel und Stawarczyk, Bogna (2021): Bond strength of CAD-CAM and conventional veneering materials to different frameworks. In: Journal of Prosthetic Dentistry, Bd. 125, Nr. 4: S. 664-673

Zadeh, Parissa Nassary; Stawarczyk, Bogna; Hampe, Rüdiger; Liebermann, Anja und Mayinger, Felicitas (2021): Edge chipping resistance of veneering composite resins. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 116, 104349

Prechtel, Alexander ORCID logoORCID: https://orcid.org/0000-0002-4666-051X; Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255; Hickel, Reinhard; Edelhoff, Daniel und Reymus, Marcel (2020): Fracture load of 3D printed PEEK inlays compared with milled ones, direct resin composite fillings, and sound teeth. In: Clinical Oral Investigations [PDF, 828kB]

Wiedenmann, Felicitas; Becker, Fabian; Eichberger, Marlis und Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 (2020): Measuring the polymerization stress of self-adhesive resin composite cements by crack propagation. In: Clinical oral investigations, Bd. 25: S. 1011-1018 [PDF, 1MB]

Reymus, Marcel; Fabritius, Rosalie; Kessler, Andreas; Hickel, Reinhard; Edelhoff, Daniel und Stawarczyk, Bogna (2020): Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study. In: Clinical Oral Investigations, Bd. 24, Nr. 2: S. 701-710

Pfefferle, Regina; Luemkemann, Nina; Wiedenmann, Felicitas und Stawarczyk, Bogna (2020): Different polishing methods for zirconia: impact on surface, optical, and mechanical properties. In: Clinical Oral Investigations, Bd. 24, Nr. 1: S. 395-403

Wiedenmann, Felicitas; Boehm, Denise; Eichberger, Marlis; Edelhoff, Daniel und Stawarczyk, Bogna (2020): Influence of different surface treatments on two-body wear and fracture load of monolithic CAD/CAM ceramics. In: Clinical Oral Investigations, Bd. 24, Nr. 9: S. 3049-3060

Micovic, Danka; Mayinger, Felicitas; Bauer, Sebastian; Roos, Malgorzata; Eichberger, Marlis und Stawarczyk, Bogna (2020): Is the high-performance thermoplastic polyetheretherketone indicated as a clasp material for removable dental prostheses? In: Clinical Oral Investigations, Bd. 25, Nr. 5: S. 2859-2866

Prechtel, Alexander; Reymus, Marcel; Edelhoff, Daniel; Hickel, Reinhard und Stawarczyk, Bogna (2020): Comparison of various 3D printed and milled PAEK materials: Effect of printing direction and artificial aging on Martens parameters. In: Dental Materials, Bd. 36, Nr. 2: S. 197-209

Stawarczyk, Bogna; Dinse, Lina; Eichberger, Marlis; Jungbauer, Rebecca und Liebermann, Anja (2020): Flexural strength, fracture toughness, three-body wear, and Martens parameters of pressable lithium-X-silicate ceramics. In: Dental Materials, Bd. 36, Nr. 3: S. 420-430

Luemkemann, Nina; Pfefferle, Regina; Jerman, Eva; Sener, Beatrice und Stawarczyk, Bogna (2020): Translucency, flexural strength, fracture toughness, fracture load of 3-unit FDPs, Martens hardness parameter and grain size of 3Y-TZP materials. In: Dental Materials, Bd. 36, Nr. 7: S. 838-845

Wiedenmann, Felicitas; Pfefferle, Regina; Reichert, Axel; Jerman, Eva und Stawarczyk, Bogna (2020): Impact of high-speed sintering, layer thickness and artificial aging on the fracture load and two-body wear of zirconia crowns. In: Dental Materials, Bd. 36, Nr. 7: S. 846-853

Jerman, Eva; Wiedenmann, Felicitas; Eichberger, Marlis; Reichert, Axel und Stawarczyk, Bogna (2020): Effect of high-speed sintering on the flexural strength of hydrothermal and thermo-mechanically aged zirconia materials. In: Dental Materials, Bd. 36, Nr. 9: S. 1144-1150

Michailova, Marianna; Elsayed, Adham; Fabel, Gertrud; Edelhoff, Daniel; Zylla, Isabela-Maria und Stawarczyk, Bogna (2020): Comparison between novel strength-gradient and color-gradient multilayered zirconia using conventional and high-speed sintering. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 111, 103977

Luemkemann, Nina; Eichberger, Marlis und Stawarczyk, Bogna (2020): Bond strength between a high-performance thermoplastic and a veneering resin. In: Journal of Prosthetic Dentistry, Bd. 124, Nr. 6: S. 790-797

Jungbauer, Rebecca; Liebermann, Anja; Kieschnick, Annett und Stawarczyk, Bogna (2020): Befestigungsmöglichkeiten von Brackets und Attachments in der Kieferorthopädie. In: Informationen Aus Orthodontie und Kieferorthopaedie, Bd. 52, Nr. 2: S. 129-135

Luemkemann, Nina; Eichberger, Marlis; Riquier, Ralph; Murphy, Ryan J. und Stawarczyk, Bogna (2020): Fracture Load of Veneered Telescopic Secondary Crowns Made of High-Performance Polymer on Zirconia Primary Crowns: Impact of Veneering Technique. In: International Journal of Prosthodontics, Bd. 33, Nr. 3: S. 307-314

Reymus, Marcel und Stawarczyk, Bogna (2020): Influence of Different Postpolymerization Strategies and Artificial Aging on Hardness of 3D-Printed Resin Materials: An In Vitro Study. In: International Journal of Prosthodontics, Bd. 33, Nr. 6: S. 634-640

Luemkemann, Nina; Schoenhoff, Lisa Marie; Buser, Ramona und Stawarczyk, Bogna (2020): Effect of Cleaning Protocol on Bond Strength between Resin Composite Cement and Three Different CAD/CAM Materials. In: Materials, Bd. 13, Nr. 18, 4150

Stawarczyk, Bogna; Liebermann, Anja; Rosentritt, Martin; Povel, Hubertus; Eichberger, Marlis und Luemkemann, Nina (2020): Flexural strength and fracture toughness of two different lithium disilicate ceramics. In: Dental Materials Journal, Bd. 39, Nr. 2: S. 302-308

Luemkemann, Nina; Eichberger, Marlis; Murphy, Ryan J. und Stawarczyk, Bogna (2020): Suitability of the new Aryl-Ketone-Polymer indicated for removable partial dentures: Analysis of elastic properties and bond strength to denture resin. In: Dental Materials Journal, Bd. 39, Nr. 4: S. 539-546

Sahrmann, Philipp; Luso, Sandra; Müller, Constanze; Ender, Andreas; Attin, Thomas; Stawarczyk, Bogna und Schmidlin, Patrick R. (2019): Titanium Implant Characteristics After Implantoplasty: An In Vitro Study on Two Different Kinds of Instrumentation. In: International Journal of Oral & Maxillofacial Implants, Bd. 34, Nr. 6: S. 1299-1305

Wiedenmann, Felicitas; Liebermann, Anja; Spintzyk, Sebastian; Eichberger, Marlis und Stawarczyk, Bogna (2019): Influence of Different Cleaning Procedures on Tensile Bond Strength Between Zirconia Abutment and Titanium Base. In: International Journal of Oral & Maxillofacial Implants, Bd. 34, Nr. 6: S. 1318-1327

Lumkemann, Nina; Eichberger, Marlis und Stawarczyk, Bogna (2019): Different surface modifications combined with universal adhesives: the impact on the bonding properties of zirconia to composite resin cement. In: Clinical Oral Investigations, Bd. 23, Nr. 11: S. 3941-3950

Jansen, Jan Ulrich; Lumkemann, Nina; Sener, Beatrice und Stawarczyk, Bogna (2019): Comparison of fracture toughness measurements for zirconia materials using two test methods. In: Dental Materials Journal, Bd. 38, Nr. 5: S. 806-812

Steiner, Rene; Edelhoff, Daniel; Stawarczyk, Bogna; Dumfahrt, Herbert und Lente, Isabel (2019): Effect of Dentin Bonding Agents, Various Resin Composites and Curing Modes on Bond Strength to Human Dentin. In: Materials, Bd. 12, Nr. 20, 3395

Liebermann, Anja; Vehling, Dirk; Eichberger, Marlis und Stawarczyk, Bogna (2019): Impact of storage media and temperature on color stability of tooth-colored CAD/CAM materials for final restorations. In: Journal of Applied Biomaterials & Functional Materials, Bd. 17, Nr. 4 [PDF, 281kB]

Jansen, Jan Ulrich; Luemkemann, Nina; Letz, Inge; Pfefferle, Regina; Sener, Beatrice und Stawarczyk, Bogna (2019): Impact of high-speed sintering on translucency, phase content, grain sizes, and flexural strength of 3Y-TZP and 4Y-TZP zirconia materials. In: Journal of Prosthetic Dentistry, Bd. 122, Nr. 4: S. 396-403

Kelch, Matthias; Schulz, Julian; Edelhoff, Daniel; Sener, Beatrice und Stawarczyk, Bogna (2019): Impact of different pretreatments and aging procedures on the flexural strength and phase structure of zirconia ceramics. In: Dental Materials, Bd. 35, Nr. 10: S. 1439-1449

Reymus, Marcel; Luemkemann, Nina und Stawarczyk, Bogna (2019): 3D-printed material for temporary restorations: impact of print layer thickness and post-curing method on degree of conversion. In: International Journal of Computerized Dentistry, Bd. 22, Nr. 3: S. 231-237

Kist, Stefan; Stawarczyk, Bogna; Kollmuss, Maximilian; Hickel, Reinhard und Huth, Karin C. (2019): Fracture load and chewing simulation of zirconia and stainless-steel crowns for primary molars. In: European Journal of Oral Sciences, Bd. 127, Nr. 4: S. 369-375

Gueth, Jan-Frederik; Stawarczyk, Bogna; Edelhoff, Daniel und Liebermann, Anja (2019): Zirconia and its novel compositions: What do clinicians need to know? In: Quintessence International, Bd. 50, Nr. 7: S. 512-520

Maischberger, Christian; Stawarczyk, Bogna und Liebermann, Anja (2019): Effect of Astringent Products on Accuracy of Polyether Impressions and Plaster Casts. In: International Journal of Prosthodontics, Bd. 32, Nr. 3, PMID 31034546: S. 281-288

Maischberger, Christian; Liebermann, Anja und Stawarczyk, Bogna (2019): The Effect of Hemostatic Agents on the Retention Strength of Zirconia Crowns Luted to Dentin Abutments. In: Materials, Bd. 12, Nr. 6, 979

Reymus, Marcel; Roos, Malgorzata; Eichberger, Marlis; Edelhoff, Daniel; Hickel, Reinhard und Stawarczyk, Bogna (2019): Bonding to new CAD/CAM resin composites: influence of air abrasion and conditioning agents as pretreatment strategy. In: Clinical Oral Investigations, Bd. 23, Nr. 2: S. 529-538

Liebermann, Anja; Pache, Christoph; Schweiger, Josef; Stawarczyk, Bogna und Huth, Karin C. (2019): Digital workflow with innovative Denacam-3D real-time navigation system for implantation and prosthetic restoration of a single-tooth implant A case report. In: Implantologie, Bd. 27, Nr. 3: S. 221-231

Liebermann, Anja; Spintzyk, Sebastian; Reymus, Marcel; Schweizer, Ernst und Stawarczyk, Bogna (2019): Nine prophylactic polishing pastes: impact on discoloration, gloss, and surface properties of a CAD/CAM resin composite. In: Clinical Oral Investigations, Bd. 23, Nr. 1: S. 327-335

Lutz, Anna-Maria; Hampe, Rüdiger; Roos, Malgorzata; Luemkemann, Nina; Eichberger, Marlis und Stawarczyk, Bogna (2019): Fracture resistance and 2-body wear of 3-dimensional-printed occlusal devices. In: Journal of Prosthetic Dentistry, Bd. 121, Nr. 1: S. 166-172

Gurdal, Isil; Atay, Ayse; Eichberger, Marlis; Cal, Ebru; Usumez, Aslihan und Stawarczyk, Bogna (2018): Color change of CAD-CAM materials and composite resin cements after thermocycling. In: Journal of Prosthetic Dentistry, Bd. 120, Nr. 4: S. 546-552

Wimmer, Timea; Eichberger, Marlis; Lumkemann, Nina und Stawarczyk, Bogna (2018): Accuracy of digitally fabricated trial dentures. In: Journal of Prosthetic Dentistry, Bd. 119, Nr. 6: S. 942-947

Stawarczyk, Bogna; Taufall, Simon; Roos, Malgorzata; Schmidlin, Patrick R. und Luemkemann, Nina (2018): Bonding of composite resins to PEEK: the influence of adhesive systems and air-abrasion parameters. In: Clinical Oral Investigations, Bd. 22, Nr. 2: S. 763-771

Zadeh, Parissa Nassary; Luemkemann, Nina; Sener, Beatrice; Eichberger, Marlis und Stawarczyk, Bogna (2018): Flexural strength, fracture toughness, and translucency of cubic/tetragonal zirconia materials. In: Journal of Prosthetic Dentistry, Bd. 120, Nr. 6: S. 948-954

Maischberger, Christian; Stawarczyk, Bogna; Hajmasy, Annette von und Liebermann, Anja (2018): Hemostatic gingival retraction agents and their impact on prosthodontic treatment steps: A narrative review. In: Quintessence International, Bd. 49, Nr. 9, 30202835: S. 719-732

Luemkemann, Nina; Strickstrock, Monika; Eichberger, Marlis; Zylla, Isabella-Maria und Stawarczyk, Bogna (2018): Impact of air-abrasion pressure and adhesive systems on bonding parameters for polyetheretherketone dental restorations. In: International Journal of Adhesion and Adhesives, Bd. 80: S. 30-38

Stoeckl, Carolin; Hampe, Rüdiger; Stawarczyk, Bogna; Haerst, Miriam und Roos, Malgorzata (2018): Macro- and microtopographical examination and quantification of CAD-CAM composite resin 2-and 3-body wear. In: Journal of Prosthetic Dentistry, Bd. 120, Nr. 4: S. 537-545

Grau, Alexander; Stawarczyk, Bogna; Roos, Malgorzata; Theelke, Björn und Hampe, Rüdiger (2018): Reliability of wear measurements of CAD-CAM restorative materials after artificial aging in a mastication simulator. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 86: S. 185-190

Wagner, Christina; Stock, Veronika; Merk, Susanne; Schmidlin, Patrick R.; Roos, Malgorzata; Eichberger, Marlis und Stawarczyk, Bogna (2018): Retention Load of Telescopic Crowns with Different Taper Angles between Cobalt-Chromium and Polyetheretherketone Made with Three Different Manufacturing Processes Examined by Pull-Off Test. In: Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry, Bd. 27, Nr. 2: S. 162-168

Hampe, Rüdiger; Luemkemann, Nina; Sener, Beatrice und Stawarczyk, Bogna (2018): The effect of artificial aging on Martens hardness and indentation modulus of different dental CAD/CAM restorative materials. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 86: S. 191-198

Bodden, Lisa; Lümkemann, Nina; Köhler, Valerie; Eichberger, Marlis und Stawarczyk, Bogna (2017): Impact of the heating/quenching process on the mechanical, optical and thermodynamic properties of polyetheretherketone (PEEK) films. In: Dental Materials, Bd. 33, Nr. 12: S. 1436-1444

Lümkemann, Nina; Eichberger, Marlis und Stawarczyk, Bogna (2017): Different PEEK qualities irradiated with light of different wavelengths: Impact on Martens hardness. In: Dental Materials, Bd. 33, Nr. 9: S. 968-975

Liebermann, Anja; Ilie, Nicoleta; Roos, Malgorzata und Stawarczyk, Bogna (2017): Effect of storage medium and aging duration on mechanical properties of self-adhesive resin-based cements. In: Journal of Applied Biomaterials & Functional Materials, Bd. 15, Nr. 3, E206-E214

Stawarczyk, Bogna; Keul, Christine; Eichberger, Marlis; Figge, David; Edelhoff, Daniel und Lümkemann, Nina (2017): Three generations of zirconia: From veneered to monolithic. Part II. In: Quintessence international, Bd. 48, Nr. 6: S. 441-450

Stawarczyk, Bogna; Keul, Christine; Eichberger, Marlis; Figge, David; Edelhoff, Daniel und Lümkemann, Nina (2017): Three generations of zirconia: From veneered to monolithic. Part I. In: Quintessence international, Bd. 48, Nr. 5: S. 369-380

Heimer, Sina; Schmidlin, Patrick R. und Stawarczyk, Bogna (2017): Discoloration of PMMA, composite, and PEEK. In: Clinical Oral investigations, Bd. 21, Nr. 4: S. 1191-1200

Liebermann, Anja; Roos, Malgorzata und Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 (2017): The Effect of Different Storage Media on Color Stability of Self-Adhesive Composite Resin Cements for up to One Year. In: Materials, Bd. 10, Nr. 3, 300 [PDF, 724kB]

Heimer, Sina; Schmidlin, Patrick R.; Roos, Malgorzata und Stawarczyk, Bogna (2017): Surface properties of polyetheretherketone after different laboratory and chairside polishing protocols. In: Journal of Prosthetic Dentistry, Bd. 117, Nr. 3: S. 419-425

Stawarczyk, Bogna; Silla, Marek; Roos, Malgorzata; Eichberger, Marlis und Lümkemann, Nina (2017): Bonding Behaviour of Polyetherketoneketone to Methylmethacrylate- and Dimethacrylate-based Polymers. In: Journal of Adhesive Dentistry, Bd. 19, Nr. 4: S. 331-338

Lümkemann, Nina; Eichberger, Marlis und Stawarczyk, Bogna ORCID logoORCID: https://orcid.org/0000-0003-1732-3255 (2017): Bonding to Different PEEK Compositions: The Impact of Dental Light Curing Units. In: Materials, Bd. 10, Nr. 1, 67 [PDF, 1MB]

Merk, Susanne; Wagner, Christina; Stock, Veronika; Eichberger, Marlis; Schmidlin, Patrick R.; Roos, Malgorzata und Stawarczyk, Bogna (2016): Suitability of Secondary PEEK Telescopic Crowns on Zirconia Primary Crowns: The Influence of Fabrication Method and Taper. In: Materials, Bd. 9, Nr. 11, 908 [PDF, 1MB]

Roos, Malgorzata; Schatz, Christine und Stawarczyk, Bogna (2016): Two Independent Prospectively Planned Blinded Weibull Statistical Analyses of Flexural Strength Data of Zirconia Materials. In: Materials, Bd. 9, Nr. 7, 512 [PDF, 1MB]

Stawarczyk, Bogna; Schmid, Philipp; Roos, Malgorzata; Eichberger, Marlis und Schmidlin, Patrick R. (2016): Spectrophotometric Evaluation of Polyetheretherketone (PEEK) as a Core Material and a Comparison with Gold Standard Core Materials. In: Materials, Bd. 9, Nr. 6, 491 [PDF, 298kB]

Merk, Susanne; Wagner, Christina; Stock, Veronika; Schmidlin, Patrick R.; Roos, Malgorzata; Eichberger, Marlis und Stawarczyk, Bogna (2016): Retention Load Values of Telescopic Crowns Made of Y-TZP and CoCr with Y-TZP Secondary Crowns: Impact of Different Taper Angles. In: Materials, Bd. 9, Nr. 5, 354 [PDF, 1MB]

Schatz, Christine; Strickstrock, Monika; Roos, Malgorzata; Edelhoff, Daniel; Eichberger, Marlis; Zylla, Isabella-Maria und Stawarczyk, Bogna (2016): Influence of Specimen Preparation and Test Methods on the Flexural Strength Results of Monolithic Zirconia Materials. In: Materials, Bd. 9, Nr. 3, UNSP 180 [PDF, 1MB]

Stock, Veronika; Schmidlin, Patrick R.; Merk, Susanne; Wagner, Christina; Roos, Malgorzata; Eichberger, Marlis und Stawarczyk, Bogna (2016): PEEK Primary Crowns with Cobalt-Chromium, Zirconia and Galvanic Secondary Crowns with Different Tapers-A Comparison of Retention Forces. In: Materials, Bd. 9, Nr. 3, 187 [PDF, 2MB]

Kramer, Matthias Richard; Edelhoff, Daniel und Stawarczyk, Bogna (2016): Flexural Strength of Preheated Resin Composites and Bonding Properties to Glass-Ceramic and Dentin. In: Materials, Bd. 9, Nr. 2, 11725677 [PDF, 1MB]

Heimer, Sina; Schmidlin, Patrick R. und Stawarczyk, Bogna (2016): Effect of different cleaning methods of polyetheretherketone on surface roughness and surface free energy properties. In: Journal of Applied Biomaterials & Functional Materials, Bd. 14, Nr. 3, E248-E255

Schmidlin, Patrick R.; Eichberger, Marlis und Stawarczyk, Bogna (2016): Glycine: A potential coupling agent to bond to helium plasma treated PEEK? In: Dental Materials, Bd. 32, Nr. 2: S. 305-310

Wimmer, Timea; Huffmann, Anne Mildred Sophie; Eichberger, Marlis; Schmidlin, Patrick R. und Stawarczyk, Bogna (2016): Two-body wear rate of PEEK, CAD/CAM resin composite and PMMA: Effect of specimen geometries, antagonist materials and test set-up configuration. In: Dental Materials, Bd. 32, Nr. 6, E127-E136

Ilie, Nicoleta und Stawarczyk, Bogna (2016): Evaluation of modern bioactive restoratives for bulk-fill placement. In: Journal of Dentistry, Bd. 49: S. 46-53

Stawarczyk, Bogna; Liebermann, Anja; Eichberger, Marlis und Güth, Jan-Frederik (2016): Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites. In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 55: S. 1-11

Gilbert, Simona; Keul, Christine; Roos, Malgorzata; Edelhoff, Daniel und Stawarczyk, Bogna (2016): Bonding between CAD/CAM resin and resin composite cements dependent on bonding agents: three different in vitro test methods. In: Clinical Oral investigations, Bd. 20, Nr. 2: S. 227-236

Stock, Veronika; Wagner, Christina; Merk, Susanne; Roos, Malgorzata; Schmidlin, Patrick R.; Eichberger, Marlis und Stawarczyk, Bogna (2016): Retention force of differently fabricated telescopic PEEK crowns with different tapers. In: Dental Materials Journal, Bd. 35, Nr. 4: S. 594-600

Liebermann, Anja; Wimmer, Timea; Schmidlin, Patrick R.; Scherer, Harry; Löffler, Patrick; Roos, Malgorzata und Stawarczyk, Bogna (2016): Physicomechanical characterization of polyetheretherketone and current esthetic dental CAD/CAM polymers after aging in different storage media. In: Journal of Prosthetic Dentistry, Bd. 115, Nr. 3: S. 321-328

Wimmer, Timea; Gallus, Korbinian; Eichberger, Marlis und Stawarczyk, Bogna (2016): Complete denture fabrication supported by CAD/CAM. In: Journal of Prosthetic Dentistry, Bd. 115, Nr. 5: S. 541-546

Keul, Christine; Köhler, Patrick; Hampe, Rüdiger; Roos, Malgorzata und Stawarczyk, Bogna (2016): Glass Fiber Post/Composite Core Systems Bonded to Human Dentin: Analysis of Tensile Load vs Calculated Tensile Strength of Various Systems Using Pull-out Tests. In: Journal of Adhesive Dentistry, Bd. 18, Nr. 3: S. 247-256

Taufall, Simon; Eichberger, Marlis; Schmidlin, Patrick R. und Stawarczyk, Bogna (2016): Fracture load and failure types of different veneered polyetheretherketone fixed dental prostheses. In: Clinical Oral investigations, Bd. 20, Nr. 9: S. 2493-2500

Stawarczyk, Bogna; Teuss, Simona; Eichberger, Marlis; Roos, Malgorzata und Keul, Christine (2015): Retention Strength of PMMA/UDMA-Based Crowns Bonded to Dentin: Impact of Different Coupling Agents for Pretreatment. In: Materials, Bd. 8, Nr. 11: S. 7486-7497 [PDF, 1MB]

Frey, Corinne; Yetkiner, Enver; Stawarczyk, Bogna; Attin, Thomas und Attin, Rengin (2012): Effects of different chlorhexidine pretreatments on adhesion of metal brackets in vitro. In: Head & Face Medicine 8:36 [PDF, 281kB]

Diese Liste wurde am Sat Oct 25 23:13:22 2025 CEST erstellt.

Open Access LMU verwendet EPrints 3, das an der School of Electronics and Computer Science der Universität Southampton entwickelt wurde.
Impressum − Datenschutz